江苏铆钉机,浙江铆钉机,上海铆钉机

Precautions for the use of automatic rivet machine:

1, when not connected to the power supply, first turn the flywheel by hand for a week, in case of accidents and damage to the parts during operation.

2, before use, check whether there are nails in the upper and lower molds. If there are nails, it must be removed to prevent the damage of finished products caused by overlapping riveting nails.

3, when the power is on, do not adjust, so as not to move the machine and hurt the adjustment personnel.

4, hand-held material operation and riveting area to keep a safe distance, in order to prevent accidents.

5. If there is interference or malfunction during the operation, please press the red switch button "OFF" to stop the operation.

6. Do not touch the transmission parts of the machine when operating.

7. Do not touch the funnel bowl when it is rotating.

8, the voltage used is the same as the motor voltage, different will produce spark burn.